Show simple item record

dc.contributor.authorNoah D. Manring
dc.date.accessioned2017-05-08T23:59:15Z
dc.date.available2017-05-08T23:59:15Z
dc.date.copyrightSeptember, 1999
dc.date.issued1999
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26257#531_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121915
dc.description.abstractIn this research, the friction within the cylinder bore of a swash-plate type axial-piston machine is examined. Unlike previous research, this work develops a mathematical model for the friction based upon lubricating conditions which are described by the well-known Stribeck curve. Furthermore, a test device is built for measuring the frictional characteristics during low pressure and low speed operation and these results are compared with the mathematical model. For high pressure and high speed considerations, a numerical investigation based upon the model is conducted and it is shown that the friction associated with a pumping piston is greater than the friction associated with a motoring piston. It is also shown that increased piston speeds usually reduce the friction within the cylinder bore; however, a “cross-over” condition may exist where the increased speed will actually increase the friction as a result of increased fluid shear. Furthermore, it is shown that speed changes have a more significant impact on motoring pistons as opposed to pumping pistons due to a difference in the location of hydrodynamic lubrication within the cylinder bore. It is noted that this difference exits due to the bore geometry and the direction of piston travel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFriction Forces Within the Cylinder Bores of Swash-Plate Type Axial-Piston Pumps and Motors
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2802507
dc.journal.fristpage531
dc.journal.lastpage537
dc.identifier.eissn1528-9028
dc.keywordsFriction
dc.keywordsForce
dc.keywordsMotors
dc.keywordsPumps
dc.keywordsCylinders
dc.keywordsPistons
dc.keywordsTravel
dc.keywordsGeometry
dc.keywordsHigh pressure (Physics)
dc.keywordsShear (Mechanics)
dc.keywordsPressure
dc.keywordsLubrication
dc.keywordsFluids AND Machinery
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record