Show simple item record

dc.contributor.authorRobert L. Williams
dc.contributor.authorDaniel W. Repperger
dc.contributor.authorJason M. Henry
dc.contributor.authorMark A. Murphy
dc.date.accessioned2017-05-08T23:59:13Z
dc.date.available2017-05-08T23:59:13Z
dc.date.copyrightSeptember, 1999
dc.date.issued1999
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26257#425_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121899
dc.description.abstractThe Naturally-Transitioning Rate-to-Force Controller (NTRFC) is presented for teleoperation of manipulators. Our goal is to provide a single controller which handles free motion, constrained motion, and the transition in-between without any artificial changes. In free motion the displacement of the master device (via the human operator’s hand) is proportional to the commanded Cartesian rate of the manipulator. In contact, the displacement of the human operator’s hand is proportional to the wrench (force/moment) exerted on the environment by the manipulator. The transition between free rate motion and applied-wrench contact with the environment requires no changes in control mode or gains and hence is termed natural. Furthermore, in contact, if the master enables force reflection, the wrench of the human operator’s hand exerted on the master is proportional to the wrench exerted on the environment by the manipulator. This article demonstrates the NTRFC concept via a simple 1-dof model and then discusses experimental implementation and results from a Merlin manipulator teleoperated via the force-reflecting PHANToM interface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNaturally-Transitioning Rate-to-Force Control in Free and Constrained Motion
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2802492
dc.journal.fristpage425
dc.journal.lastpage432
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsMotion
dc.keywordsManipulators
dc.keywordsDisplacement
dc.keywordsControl equipment
dc.keywordsReflection AND Phantoms
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1999:;volume( 121 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record