Show simple item record

dc.contributor.authorM. Perl
dc.date.accessioned2017-05-08T23:57:41Z
dc.date.available2017-05-08T23:57:41Z
dc.date.copyrightFebruary, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28382#69_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121054
dc.description.abstractA simple, yet improved, experimental method for measuring the level of autofrettage in thick-walled cylinders, such as gun barrels, is proposed. A representative ring cut from the barrel serves as the test specimen. The ring is split by cutting it radially, while measuring the released hoop strain at the inner and outer surfaces diametrically opposite from the split line. The opening angle resulting from the spring apart from the ring is also monitored. An analysis based on Hill’s residual stress field yields an approximate relation which readily enables the determination of the prevailing level of autofrettage from strain measurements as well as from the value of the opening angle. This relation is found to be practically universal for all relevant cylinder configurations b/a = 1.6–2.2 and all levels of autofrettage of up to φ = 100 percent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Improved Split-Ring Method for Measuring the Level of Autofrettage in Thick-Walled Cylinders
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2841887
dc.journal.fristpage69
dc.journal.lastpage73
dc.identifier.eissn1528-8978
dc.keywordsCylinders
dc.keywordsAutofrettage
dc.keywordsGun barrels
dc.keywordsSprings
dc.keywordsStrain measurement
dc.keywordsStress AND Cutting
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record