Show simple item record

dc.contributor.authorX. B. Lin
dc.contributor.authorR. A. Smith
dc.date.accessioned2017-05-08T23:57:41Z
dc.date.available2017-05-08T23:57:41Z
dc.date.copyrightFebruary, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28382#17_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121046
dc.description.abstractFatigue crack growth was numerically simulated for various internal surface cracks with initially either semi-elliptical or irregular crack fronts. The simulation was directly based on a series of three-dimensional finite element analyses from which the stress intensity factors along the front of growing cracks were estimated. The fatigue crack growth law obtained from small laboratory specimens was incrementally integrated at a set of points along the crack front, and a new crack front was then re-established according to the local advances at this set of points by using a cubic spline curve. This method enabled the crack shape to be predicted without having to make the usual assumption of semi-elliptical shape. Fatigue analysis results are presented and discussed for fatigue shape developments and deviations from the semi-elliptical shape, aspect ratio changes, stress intensity factor variations during crack growth, and fatigue life predictions. Some of the results were also compared with those obtained by two simplified methods based on one and two degree-of-freedom models, respectively.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Growth Prediction of Internal Surface Cracks in Pressure Vessels
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2841878
dc.journal.fristpage17
dc.journal.lastpage23
dc.identifier.eissn1528-8978
dc.keywordsFatigue
dc.keywordsPressure vessels
dc.keywordsSurface cracks
dc.keywordsFracture (Materials)
dc.keywordsShapes
dc.keywordsFatigue cracks
dc.keywordsStress
dc.keywordsSplines
dc.keywordsSimulation
dc.keywordsDegrees of freedom
dc.keywordsFinite element analysis
dc.keywordsFatigue analysis AND Fatigue life
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record