Show simple item record

dc.contributor.authorS. R. Reid
dc.contributor.authorJ. L. Yang
dc.date.accessioned2017-05-08T23:57:40Z
dc.date.available2017-05-08T23:57:40Z
dc.date.copyrightMay, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28384#170_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121036
dc.description.abstractThe dynamic elastic-plastic behavior of a bent cantilever pipe subjected to an in-plane force pulse at its tip is described. A theoretical model based on a large deflection formulation of dynamic beam theory is described. This takes into account the plastic hardening-softening behavior which is characteristic of a pipe when it is subjected to large changes in curvature. This beam model was first formulated and applied by Reid et al. (1995b, 1996), who demonstrated that it was able to describe quite accurately the characteristics of freely whipping, straight cantilever pipes. The present paper extends this model to enable it to be applied to bent cantilever pipes and covers cases in which the bend angle is opened or closed. Previous attempts (Wang, 1991) to analyze these problems using a rigid, perfectly plastic model were not completely successful due to the inability to identify admissible modes of deformation for all circumstances. A systematic program of pipe whip tests has been carried out in UMIST on right-angled bent pipes. To illustrate the validity and use of the theoretical model, two typical cases are considered and the results compared with the experimental data extracted from high-speed films of the tests. Excellent agreement between the two is demonstrated.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePipe Whip: In-Plane Whipping of Bent Cantilever Pipes
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842236
dc.journal.fristpage170
dc.journal.lastpage178
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsCantilevers
dc.keywordsDeflection
dc.keywordsForce
dc.keywordsDeformation AND Hardening
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record