Show simple item record

dc.contributor.authorK. Iida
dc.contributor.authorM. Hayashi
dc.contributor.authorT. Yamauchi
dc.contributor.authorM. Saito
dc.contributor.authorM. Sato
dc.contributor.authorM. Higuchi
dc.contributor.authorA. Nakagawa
dc.date.accessioned2017-05-08T23:57:40Z
dc.date.available2017-05-08T23:57:40Z
dc.date.copyrightMay, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28384#157_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121033
dc.description.abstractFour-point bending and rotating bending fatigue tests were conducted on socket-welded joints made of carbon, stainless, and Cr-Mo steels for clarification of the effects of diameter, welding pass sequence and post-weld heat treatment (PWHT) on fatigue strength. The results were evaluated quantitatively. Fatigue strength of socket-welded joints was found to strongly depend on weld pass sequences in fillet welds, this being possibly due to large change in residual stress distribution at roots and toes. The effects of residual stress were thus examined quantitatively by comparison of fatigue strength of PWHT stress-free specimens with that of as-welded specimens. By the modified Goodman’s method, the lowest S-N curve corresponding to maximum tensile residual stress and the highest S-N curve corresponding to maximum compression residual stress were obtained for different steels and diameters. Conventional S-N data of socket-welded joints were situated between these two limiting curves. Based on the lowest curve, fatigue strength reduction factors of socket-welded joints were proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical Study on Fatigue Strength Reduction Factor of Small-Diameter Socket-Welded Pipe Joints
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842234
dc.journal.fristpage157
dc.journal.lastpage163
dc.identifier.eissn1528-8978
dc.keywordsPipe joints
dc.keywordsFatigue strength
dc.keywordsStress
dc.keywordsSteel
dc.keywordsWelding
dc.keywordsFatigue testing
dc.keywordsSedimentation
dc.keywordsHeat treating (Metalworking)
dc.keywordsStress concentration
dc.keywordsWelded joints
dc.keywordsCarbon AND Compression
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record