Show simple item record

dc.contributor.authorK. Iida
dc.contributor.authorM. Hayashi
dc.contributor.authorT. Yamauchi
dc.contributor.authorM. Saito
dc.contributor.authorM. Sato
dc.contributor.authorM. Higuchi
dc.contributor.authorA. Nakagawa
dc.date.accessioned2017-05-08T23:57:40Z
dc.date.available2017-05-08T23:57:40Z
dc.date.copyrightMay, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28384#149_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121032
dc.description.abstractThe authors conducted fully reversed four-point bending fatigue tests on socket-welded joints 20 to 50 mm in nominal diameter, and rotating bending fatigue tests on socket-welded joints 20 mm in nominal diameter. S-N curves for 33 series of different types of specimens were obtained. Examination was made of the effects of various parameters listed in the forthcoming on fatigue strength such as steel types (carbon and stainless steels), diameter, pipe thickness (Sch), fillet shape, slip-on gap, and root defects. Bending fatigue test results indicated fatigue strength for socket-welded joints to be less for longer life regions than reported in the literature by Markl and George (1950). Fatigue strength for socket joints of 50 mm nominal diameter at 107 cycles of fatigue life was 46 MPa for carbon steel and 60 MPa for stainless steel with nominal bending stress on the pipe surface. Cracks generally originated from the toe when stress amplitude was high with shorter fatigue life and from the root when amplitude was small with longer life. Fatigue strength was greater for smaller diameter, larger Sch (thicker pipe wall), final welding pass on the toe of pipe side, and in the absence of a slip-on gap. From fatigue test results of socket joints with weld defects at the roots, an empirical equation for the relation of defect size with decrease in fatigue strength was established. Fatigue strength was found to decrease to 60 percent the original level for defect size 25 percent of leg length.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study on Fatigue Strength of Small-Diameter Socket-Welded Pipe Joints
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842233
dc.journal.fristpage149
dc.journal.lastpage156
dc.identifier.eissn1528-8978
dc.keywordsPipe joints
dc.keywordsFatigue strength
dc.keywordsFatigue testing
dc.keywordsPipes
dc.keywordsStainless steel
dc.keywordsFatigue life
dc.keywordsProduct quality
dc.keywordsCarbon steel
dc.keywordsStress
dc.keywordsSteel
dc.keywordsWelding
dc.keywordsFracture (Materials)
dc.keywordsBending (Stress)
dc.keywordsCarbon
dc.keywordsThickness
dc.keywordsCycles
dc.keywordsEquations AND Shapes
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record