Show simple item record

dc.contributor.authorT. Fukuoka
dc.contributor.authorT. Takaki
dc.date.accessioned2017-05-08T23:57:38Z
dc.date.available2017-05-08T23:57:38Z
dc.date.copyrightAugust, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28385#226_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121010
dc.description.abstractIn a bolted joint, failures usually initiate at the first root of the bolt thread. However, rupture around the bolt head is sometimes reported for a tap bolt because of high stresses produced by tightening torque applied to the bolt head. It is also well known that manufacturing errors of internal threads in a tapped hole are generally much larger than those of external threads, thus leading to the failures concerned. In this paper, mechanical behaviors of bolted joints in various clamping configurations are analyzed using FEM as multi-body elastic contact problem, and the effects of nominal diameter, friction and pitch error upon stress concentrations are evaluated for through bolts, studs, and tap bolts. It is then quantitatively estimated on the effectiveness of “recessed internal threads” for reducing the stress concentration occurred around the far end of bolt hole. In addition, the tightening process and strength of a bottoming stud, which have seldom been studied despite favorable performance in preventing stress concentration at the runout of threads, are also investigated.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanical Behaviors of Bolted Joint in Various Clamping Configurations
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842050
dc.journal.fristpage226
dc.journal.lastpage231
dc.identifier.eissn1528-8978
dc.keywordsMechanical behavior
dc.keywordsThread
dc.keywordsErrors
dc.keywordsFailure
dc.keywordsStress
dc.keywordsStress concentration
dc.keywordsFinite element model
dc.keywordsRupture
dc.keywordsFinite element methods
dc.keywordsBolted joints
dc.keywordsTorque
dc.keywordsFriction AND Manufacturing
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record