Show simple item record

dc.contributor.authorA. Kalnins
dc.contributor.authorD. P. Updike
dc.date.accessioned2017-05-08T23:57:37Z
dc.date.available2017-05-08T23:57:37Z
dc.date.copyrightNovember, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28387#431_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/121002
dc.description.abstractThe condition of shakedown is examined for torispherical heads. The reason for using plastic analysis is to account for the strengthening that heads experience when subjected to internal pressure. Cyclic pressures are considered up to an allowable burst pressure that is based on the membrane stresses of the spherical part of the head. To simulate a proof test before service cycling, cases when the applied pressure is higher for the first cycle are also included. A definition of shakedown is used that places the limit of twice the yield strength on a fatigue stress parameter range that is defined in the paper. The equivalent stress and plastic strain ranges are calculated for ten head thickness-to-spherical radius ratios. From these data, shakedown pressures are obtained as fractions of the allowable burst pressure. By giving bounds for isotropic and kinematic strain-hardening models, the results are made independent from specific cyclic material behavior. It is also shown that if an elastic, geometrically linear algorithm is used, which is unable to account for the strengthening, the fatigue stress parameter range is overestimated for the thinner heads.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleShakedown of Torispherical Heads Using Plastic Analysis
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842355
dc.journal.fristpage431
dc.journal.lastpage437
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsAlgorithms
dc.keywordsCycles
dc.keywordsMembranes
dc.keywordsThickness
dc.keywordsWork hardening AND Yield strength
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record