Show simple item record

dc.contributor.authorN. Miura
dc.contributor.authorG. M. Wilkowski
dc.date.accessioned2017-05-08T23:57:36Z
dc.date.available2017-05-08T23:57:36Z
dc.date.copyrightNovember, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28387#406_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120997
dc.description.abstractOne of the key aspects in leak-before-break analyses is to predict the maximum load-carrying capacity of a circumferentially cracked pipe. Such analyses require the fracture resistance of the material using the J -integral parameter, typically using small-scale laboratory specimens, such as compact tension, C(T), or three-point bend specimens. To evaluate the similitude between the laboratory specimens and a circumferentially through-wall-cracked pipe, the toughness can be evaluated directly from the pipe using an analysis typically called an η-factor approach. The fracture resistance from the pipe tests can then be compared to laboratory specimen toughness values to assess similitude issues. Additionally, several analysis methods (i.e., LBB.NRC, LBB.ENG, LBB.GE, etc.) that predict maximum load capability of through-wall-cracked pipes have η-factor analyses embedded in them. Hence, the evaluation of the J-R curve accuracy or consistency with small-scale specimens is a verification of one step in such predictive analyses. This paper presents extensions to the earlier η-factor solutions for circumferentially through-wall-cracked pipes where the previous analyses were for cracks in pipes under either pure bending or pure tension. The improvements investigated account for loading under combined bending and tension due to internal pressure. The application of these methods to full-scale pipe tests is presented in Part II (Miura and Wilkowski, 1998) of this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleJ-R Curves From Circumferentially Through-Wall-Cracked Pipe Tests Subjected to Combined Bending and Tension—Part I: Theory and Numerical Simulation
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842351
dc.journal.fristpage406
dc.journal.lastpage411
dc.identifier.eissn1528-8978
dc.keywordsComputer simulation
dc.keywordsPipes
dc.keywordsTension
dc.keywordsToughness
dc.keywordsElectrical resistance
dc.keywordsFracture (Process)
dc.keywordsPressure
dc.keywordsStress
dc.keywordsLoad bearing capacity AND Leak-before-break
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record