Show simple item record

dc.contributor.authorJ. W. Tedesco
dc.contributor.authorC. A. Ross
dc.date.accessioned2017-05-08T23:57:36Z
dc.date.available2017-05-08T23:57:36Z
dc.date.copyrightNovember, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28387#398_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120996
dc.description.abstractThis paper summarizes the results of a comprehensive experimental study to quantify the effects of strain rate on concrete compressive and tensile strengths. Direct compression and splitting tensile tests were conducted at quasi-static rates (between 10−7 /s and 10−5 /s) in a standard MTS machine to establish the “static” properties. These same tests were conducted at high strain rates (between 10−1 /s and 103 /s) on a split-Hopkinson pressure bar (SHPB) to determine the dynamic material properties. A statistical analysis was performed on the data and strain-rate-dependent constitutive equations, both for compression and tension, were developed. These constitutive equations were subsequently employed to modify an existing quasi-static, nonlinear concrete material model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStrain-Rate-Dependent Constitutive Equations for Concrete
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842350
dc.journal.fristpage398
dc.journal.lastpage405
dc.identifier.eissn1528-8978
dc.keywordsConcretes
dc.keywordsConstitutive equations
dc.keywordsCompression
dc.keywordsStatistical analysis
dc.keywordsTension
dc.keywordsMaterials properties
dc.keywordsPressure AND Machinery
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record