Show simple item record

dc.contributor.authorA. E. Segall
dc.contributor.authorC. Tricou
dc.contributor.authorM. Evanko
dc.contributor.authorJ. C. Conway
dc.date.accessioned2017-05-08T23:57:34Z
dc.date.available2017-05-08T23:57:34Z
dc.date.copyrightNovember, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28387#393_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120995
dc.description.abstractAn investigation was launched into the feasibility of improving the fatigue life of thick-walled cylinders with cross-bores by using a localized autofrettage technique. This technique utilized the high stress concentration at the cross-bore to induce localized residual stresses using relatively low internal pressures. An elastic-plastic finite-element analysis indicated that the resulting residual stresses in the vicinity of the cross-bore were predominately compressive and not sufficient in magnitude to induce reverse plasticity. When the resulting residual stresses were used with an elastic fracture-mechanics assessment of a quarter-circular crack at the intersection of the cylinder and cross-bore inner diameter, a significant extension of fatigue life was shown to be possible. In addition to prolonging the useful life of the cylinder, the localized residual stresses were shown to be possible at pressures below the yield threshold for the thick-walled cylinder. Thus, reverse plasticity, permanent deformations, and the need for post-autofrettage machining operations that could inadvertently lessen the beneficial results of a traditional autofrettage were avoided.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLocalized Autofrettage as a Design Tool for the Fatigue Improvement of Cross-Bored Cylinders
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842349
dc.journal.fristpage393
dc.journal.lastpage397
dc.identifier.eissn1528-8978
dc.keywordsFatigue
dc.keywordsDesign
dc.keywordsCylinders
dc.keywordsAutofrettage
dc.keywordsResidual stresses
dc.keywordsPlasticity
dc.keywordsFatigue life
dc.keywordsFinite element analysis
dc.keywordsDeformation
dc.keywordsFracture mechanics
dc.keywordsMachining
dc.keywordsStress concentration
dc.keywordsIntersections AND Fracture (Materials)
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record