Show simple item record

dc.contributor.authorC. Levy
dc.contributor.authorM. Perl
dc.contributor.authorH. Fang
dc.date.accessioned2017-05-08T23:57:33Z
dc.date.available2017-05-08T23:57:33Z
dc.date.copyrightNovember, 1998
dc.date.issued1998
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28387#349_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120987
dc.description.abstractErosion geometry effects on the mode I stress intensity factor (SIF) for a crack emanating from the erosion’s deepest point in an autofrettaged, pressurized, thick-walled cylinder are investigated. The problem is solved via the FEM method and knowledge of the asymptotic behavior of short cracks. Autofrettage, based on von Mises yield criterion, is simulated by thermal loading and SIFs are determined by the nodal displacement method. SIFs are evaluated for a variety of relative crack lengths, a0 /W = 0.01 – 0.45, emanating from the tip of erosions of different geometries. In Part I of this paper, two configurations are considered: (a ) semi-circular erosions of relative depths of 5 percent of the cylinder’s wall thickness, W ; and (b ) arc erosions for several dimensionless radii of curvature, r′/W = 0.05 – 0.4. While deep cracks are almost unaffected by the erosion, the effective SIF for relatively short cracks is found to be significantly enhanced by the presence and geometry of the erosion and might reduce the vessel’s fatigue life.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCracks Emanating From an Erosion in a Pressurized Autofrettaged Thick-Walled Cylinder—Part I: Semi-Circular and Arc Erosions
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842342
dc.journal.fristpage349
dc.journal.lastpage353
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsErosion
dc.keywordsCylinders
dc.keywordsGeometry
dc.keywordsWall thickness
dc.keywordsAutofrettage
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsDisplacement
dc.keywordsFatigue life AND Finite element model
dc.treeJournal of Pressure Vessel Technology:;1998:;volume( 120 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record