Show simple item record

dc.contributor.authorAmpere A. Tseng
dc.contributor.authorA. C. W. Lau
dc.contributor.authorShi R. Wang
dc.date.accessioned2017-05-08T23:56:49Z
dc.date.available2017-05-08T23:56:49Z
dc.date.copyrightJanuary, 1998
dc.date.issued1998
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26989#86_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120552
dc.description.abstractA combined experimental-numerical approach has been developed to quantify the strain rate variation of the workpiece in the roll bite region. In this approach, cold rolling experiments at a production mill were conducted first. Then tensile and microhardness tests were performed on workpieces before and after cold rolling to establish the relationship between the microhardness and plastic strain of the material. Microhardness measurements were also conducted in the roll bite region on a partially cold rolled workpiece. A finite element rolling simulation was performed to predict the spatial variations of the strain and strain rate. Through microhardness matching, it was found that the finite-element predicted strains agree very well with those actually existing in the rolled workpiece. Consequently, the finite-element predicted strain rates, whose time-accumulation directly gave strains which matched the actual strains, were verified. Finally, a finite-element simulation of both cold and hot rolling was conducted to assess the effect of several major rolling parameters on the strain rate variation in the bite region. Results show that the spatial variations of strain rate in the roll bite region are extremely nonuniform for both cold and hot rolling.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLocal Variations of Strain and Strain Rate in Roll Bite Region During Rolling of Steels
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806843
dc.journal.fristpage86
dc.journal.lastpage96
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsMeasurement
dc.keywordsSimulation
dc.keywordsFinite element analysis
dc.keywordsHot rolling AND Microhardness
dc.treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record