Show simple item record

dc.contributor.authorJin Liu
dc.contributor.authorJed Lyons
dc.contributor.authorMichael Sutton
dc.contributor.authorAnthony Reynolds
dc.date.accessioned2017-05-08T23:56:49Z
dc.date.available2017-05-08T23:56:49Z
dc.date.copyrightJanuary, 1998
dc.date.issued1998
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26989#71_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120550
dc.description.abstractA series of fracture mechanics tests were conducted at temperatures of 650°C and 704°C in air, using Inconel® 718. A noncontacting measurement technique, based on computer vision and digital image correlation, was applied to directly measure surface displacements and strains prior to and during creep crack growth. For the first time, quantitative comparisons at elevated temperatures are presented between experimentally measured near-crack-tip deformation fields and theoretical linear elastic and viscoelastic fracture mechanics solutions. The results establish that linear elastic conditions dominate the near-crack-tip displacements and strains at 650°C during crack growth, and confirm that KI is a viable continuum-based fracture parameter for creep growth characterization. Postmortem fractographic analyses indicate that grain boundary embrittlement leads to crack extension before a significant amount of creep occurs at this temperature. At higher temperatures, however, no crack growth was observed due to crack tip blunting and concurrent stress reduction after load application.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Characterization of Crack Tip Deformation Fields in Alloy 718 at High Temperatures
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806840
dc.journal.fristpage71
dc.journal.lastpage78
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsFracture (Materials)
dc.keywordsIndium alloys
dc.keywordsHigh temperature
dc.keywordsExperimental characterization
dc.keywordsTemperature
dc.keywordsCreep
dc.keywordsFracture mechanics
dc.keywordsStress
dc.keywordsGrain boundaries
dc.keywordsFracture (Process)
dc.keywordsComputers
dc.keywordsEmbrittlement AND Fractography
dc.treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record