Show simple item record

dc.contributor.authorNakao Shirafuji
dc.contributor.authorKenji Shimomizuki
dc.contributor.authorMasao Sakane
dc.contributor.authorMasateru Ohnami
dc.date.accessioned2017-05-08T23:56:49Z
dc.date.available2017-05-08T23:56:49Z
dc.date.copyrightJanuary, 1998
dc.date.issued1998
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26989#57_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120548
dc.description.abstractThis paper studies the high temperature multiaxial low cycle fatigue of Mar-M247LC directionally solidified superalloy. Tension-torsion multiaxial low cycle fatigue tests were carried out using Mar-M247LC tubular specimens at 1173K in air. Several multiaxial strain and stress parameters were applied to the experimental data to examine the suitability of the parameters. All the multiaxial strain parameters proposed so far could not successfully correlate the multiaxial low cycle fatigue data of the directionally solidified superalloy, but the maximum principal stress and the equivalent stress based on crack opening displacement could correlate the data within a small scatter. This paper proposes a new multiaxial strain parameter which takes account of the anisotropy of elastic constant of directionally solidified superalloys. The proposed strain parameter correlates the multiaxial low cycle fatigue data within a factor of two scatter band. This paper also describes the crack mode and cyclic constitutive relation of the superalloy in connection with the anisotropy of the elastic constant.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTension-Torsion Multiaxial Low Cycle Fatigue of Mar-M247LC Directionally Solidified Superalloy at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806838
dc.journal.fristpage57
dc.journal.lastpage63
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsSuperalloys
dc.keywordsTorsion
dc.keywordsLow cycle fatigue
dc.keywordsTension
dc.keywordsStress
dc.keywordsAnisotropy
dc.keywordsElectromagnetic scattering
dc.keywordsFracture (Materials)
dc.keywordsElastic constants
dc.keywordsHigh temperature AND Displacement
dc.treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record