Show simple item record

dc.contributor.authorT. A. Cruse
dc.contributor.authorR. C. Dommarco
dc.contributor.authorP. C. Bastías
dc.date.accessioned2017-05-08T23:56:48Z
dc.date.available2017-05-08T23:56:48Z
dc.date.copyrightJanuary, 1998
dc.date.issued1998
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26989#26_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120543
dc.description.abstractThe static and low cycle fatigue strength of an air plasma sprayed (APS) partially stabilized zirconia thermal barrier coating (TBC) is experimentally evaluated. The shear testing utilized the Iosipescu shear test arrangement. Testing was performed parallel to the TBC-substrate interface. The TBC testing required an innovative use of steel extensions with the TBC bonded between the steel extensions to form the standard losipescu specimen shape. The test method appears to have been successful. Fracture of the TBC was initiated in shear, although unconstrained specimen fractures propagated at the TBC-bond coat interface. The use of side grooves on the TBC was successful in keeping the failure in the gage section and did not appear to affect the shear strength values that were measured. Low cycle fatigue failures were obtained at high stress levels approaching the ultimate strength of the TBC. The static and fatigue strengths do not appear to be markedly different from tensile properties for comparable TBC material.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleShear Strength of a Thermal Barrier Coating Parallel to the Bond Coat
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806834
dc.journal.fristpage26
dc.journal.lastpage32
dc.identifier.eissn1528-8889
dc.keywordsShear strength
dc.keywordsThermal barrier coatings
dc.keywordsShear (Mechanics)
dc.keywordsTesting
dc.keywordsFailure
dc.keywordsLow cycle fatigue
dc.keywordsSteel
dc.keywordsFracture (Process)
dc.keywordsTensile strength
dc.keywordsFatigue
dc.keywordsGages
dc.keywordsStress
dc.keywordsPlasmas (Ionized gases) AND Shapes
dc.treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record