Show simple item record

dc.contributor.authorJackie Li
dc.contributor.authorLaura Riester
dc.contributor.authorErik T. Thostenson
dc.contributor.authorTsu-Wei Chou
dc.date.accessioned2017-05-08T23:56:47Z
dc.date.available2017-05-08T23:56:47Z
dc.date.copyrightApril, 1998
dc.date.issued1998
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26991#154_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120533
dc.description.abstractThe indentation load-displacement behavior of three material systems tested with a Berkovich indenter has been examined. The materials studied were the substrate materials—silicon and polycarbonate, and the coating/substrate systems—diamond-like carbon (DLC) coating on silicon, and DLC coating on polycarbonate. They represent three material systems, namely, bulk, soft-coating on hard-substrate, and hard-coating on soft-substrate. Delaminations in the soft-coating/hard-substrate (DLC/Si) system and cracking in the hard-coating/soft-substrate system (DLC/Polycarbonate) were observed. Parallel to the experimental work, an elastic analytical effort has been made to examine the influence of the film thickness and the properties of the coating/substrate systems. Comparisons between the experimental data and analytical solutions of the load-displacement curves during unloading show good agreement. The analytical solution also suggests that the Young’s modulus and hardness of the thin film can not be measured accurately using Sneddon’s solution for bulk materials when the thickness of the film is comparable to the loading contact radius of the indenter. The elastic stress field analysis provides a basis for understanding the experimentally observed delaminations and cracking of the coating/substrate systems.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of Thin-Film Coating/Substrate Systems by Nanoindentation
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2807005
dc.journal.fristpage154
dc.journal.lastpage162
dc.identifier.eissn1528-8889
dc.keywordsCoating processes
dc.keywordsCoatings
dc.keywordsThin films
dc.keywordsNanoindentation
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsSilicon
dc.keywordsDisplacement
dc.keywordsDelamination
dc.keywordsFilm thickness
dc.keywordsThickness
dc.keywordsDiamonds
dc.keywordsElasticity
dc.keywordsBulk solids AND Carbon
dc.treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record