Show simple item record

dc.contributor.authorG. M. Newaz
dc.contributor.authorS. Q. Nusier
dc.contributor.authorZ. A. Chaudhury
dc.date.accessioned2017-05-08T23:56:47Z
dc.date.available2017-05-08T23:56:47Z
dc.date.copyrightApril, 1998
dc.date.issued1998
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26991#149_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120532
dc.description.abstractProgressive damage evolution leading to spallation was investigated in Electron Beam—Plasma Vapor Deposition (EB-PVD) partially stabilized zirconia thermal barrier coating (TBC) applied to Nickel-based single crystal superalloy, Rene N5 with PtAl bondcoat. Thermal cycles were between 200-1177C. Progressive damage evolution was monitored using microscopy on samples subjected to a series of thermal cycles. Fick’s law can describe the thermally grown oxide (TGO) thickness for early cycles. However, at higher number of thermal cycles, damage in the form of microcracks and their link-up results in the development of a larger delamination crack through the TGO layer and monitoring oxide thickness becomes difficult. Thus, both oxidation kinetics and damage appears to play significant roles as they relate to spallation. As the early microcracks coalesce to form a major delamination crack, the susceptibility for TBC buckling is increased. The damage thickness continues to increase with number of thermal cycles indicating a progressive buckling condition. Estimation shows that a delamination crack length of about sixteen times the TBC thickness is needed for the current material system to cause buckling. Progressive microcrack linking to form a large delamination crack followed by progressive buckling of the TBC layer appear to promote spallation. Physical evidence of microcrack link-up and progressive buckling was found in specimens prior to complete spallation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDamage Accumulation Mechanisms in Thermal Barrier Coatings
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2807004
dc.journal.fristpage149
dc.journal.lastpage153
dc.identifier.eissn1528-8889
dc.keywordsThermal barrier coatings
dc.keywordsMechanisms
dc.keywordsBuckling
dc.keywordsCycles
dc.keywordsMicrocracks
dc.keywordsThickness
dc.keywordsDelamination
dc.keywordsSpallation (Nuclear physics)
dc.keywordsFracture (Materials)
dc.keywordsMicroscopy
dc.keywordsoxidation
dc.keywordsCrystals
dc.keywordsNickel
dc.keywordsSuperalloys
dc.keywordsCathode ray oscilloscopes
dc.keywordsVapor deposition AND Plasmas (Ionized gases)
dc.treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record