Show simple item record

dc.contributor.authorYukio Tachibana
dc.contributor.authorErhard Krempl
dc.date.accessioned2017-05-08T23:56:44Z
dc.date.available2017-05-08T23:56:44Z
dc.date.copyrightJuly, 1998
dc.date.issued1998
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26992#193_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120510
dc.description.abstractA simplified version of the Viscoplasticity Theory Based on Overstress (VBO) is applied to modeling of Alloy 800H at homologous temperatures between 0.6 and 0.8 The present formulation is simplified to the extent that omission of any constant would deprive the model to represent phenomena. Examples of such a phenomenon are tertiary creep and static recovery. The three-dimensional formulation of the simplified model for Alloy 8OOH at high homologous temperature needs a total of 10 constants. The parent theory from which the simplified model is derived has 18 constants that must be determined from experiments. The simplified theory has essentially the same modeling capability as the parent theory. There are differences in the predictions of the two versions for very long-time behaviour for which no test data are available. When material data are available for comparison the modeling of the regular and the simplified versions are very good and show roughly the same amount of deviation. The results suggest that the simplified version should be tried first when a given material has to be modeled.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling of High Homologous Temperature Deformation Behaviour Using the Viscoplasticity Theory Based on Overstress (VBO): Part III—A Simplified Model
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812341
dc.journal.fristpage193
dc.journal.lastpage196
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsModeling
dc.keywordsViscoplasticity
dc.keywordsAlloys AND Creep
dc.treeJournal of Engineering Materials and Technology:;1998:;volume( 120 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record