• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    On the Chemo-Mechanical Polishing (CMP) of Si3N4 Bearing Balls With Water Based CeO2 Slurry

    Thumbnail
    View/Open
    JEMTA8-26994#304_1.pdf (1.178Mb)
    Date
    1998
    Author
    Ming Jiang
    Nelson O. Wood
    R. Komanduri
    Metadata
    Show full item record
    Abstract
    Among various abrasives investigated for the chemo-mechanical polishing (CMP) of Si3 N4 balls (Jiang, 1998), cerium oxide (CeO2 ) was found to be the most effective polishing medium (even superior to Cr2 03 , Bhagavatula and Komanduri, 1996), yielding an extremely smooth and damage-free surface with a finish Ra of ≈4 nm and Rt of ≈40 nm. In this investigation, the underlying reasons for the superior finish with CeO2 were investigated. Various chemical reactions involved in CMP of Si3 N4 balls with CeO2 were investigated (Gibbs free energy minimization) and a mechanism for the CMP is proposed. The two important functions that CeO2 performs in the CMP of Si3 N4 are: 1. It participates directly in the chemical reaction (oxidization-reduction reaction) with Si3 N4 workmaterial leading to the formation of a thin SiO2 layer, 2. The hardness of CeO2 is closer to that of the thin SiO2 layer formed on Si3 N4 but significantly lower than Si3 N4 workmaterial (≈1/3). It can thus remove the brittle SiO2 reaction product effectively without damaging the Si3 N4 substrate as no abrasion can take place by CeO2 on Si3 N4 . The kinetic action, which involves the removal of the reaction products from the interface by subsequent mechanical action of flowing water and CeO2 is critical to CMP. The chemical reaction could proceed on a continuing basis so long as the passivation layers are removed by the mechanical action at the same time. CeO2 is found to be very effective in a water environment (hydrolysis) leading to the formation of additional SiO2 by reacting with Si3 N4 thereby enhancing the CMP of Si3 N4 . Several similarities between polishing of Si3 N4 and glass (SiO2 ) (Cook, 1990), including the polishing environment (CeO2 plus the magnetic fluid, pH value ≈6) and the mechanism of polishing were observed. Also, after investigating various reaction species in the CMP of Si3 N4 with CeO2 and Cr2 03 , the former is found to be much safer from an environmental point of view (Reddy and Komanduri, 1998).
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/120506
    Collections
    • Journal of Engineering Materials and Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV