Show simple item record

dc.contributor.authorS. R. Gollahalli
dc.date.accessioned2017-05-08T23:56:25Z
dc.date.available2017-05-08T23:56:25Z
dc.date.copyrightJune, 1998
dc.date.issued1998
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26476#161_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120331
dc.description.abstractAn experimental study conducted to determine the effects of lifting the flame base off the burner rim on the differences between the flame characteristics of diffusion flames from circular and elliptic burners is presented. The in-flame profiles of temperature, concentrations of fuel and combustion product species, and the mean and fluctuating components of axial velocity are presented. This study has shown that the effects of burner geometry in turbulent lifted flames are considerable only in the near-burner region. In the midflame and far-burner regions, the effects traceable to burner geometry are much weaker, contrary to those observed in the attached flame configuration. The observations are attributed to the turbulence and additional air entrainment into the jet prior to the flame base accompanying the lift-off process, which mitigate the effects of burner geometry.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Flame Lift-Off on the Differences Between the Diffusion Flames From Circular and Elliptic Burners
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2795028
dc.journal.fristpage161
dc.journal.lastpage166
dc.identifier.eissn1528-8994
dc.keywordsFlames
dc.keywordsDiffusion flames
dc.keywordsGeometry
dc.keywordsTurbulence
dc.keywordsTemperature
dc.keywordsCombustion AND Fuels
dc.treeJournal of Energy Resources Technology:;1998:;volume( 120 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record