Show simple item record

dc.contributor.authorB.-J. Skrifvars
dc.contributor.authorE. J. Anthony
dc.contributor.authorM. Hupa
dc.date.accessioned2017-05-08T23:56:23Z
dc.date.available2017-05-08T23:56:23Z
dc.date.copyrightSeptember, 1998
dc.date.issued1998
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26477#215_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120314
dc.description.abstractPetroleum coke firing in a circulating fluidized bed boiler has sometimes been reported to be associated with cyclone deposit problems and return leg plugging. In this paper, we present data which indicate that some of these problems may be due to the calcium-rich bed material used during the firing. We have earlier shown that calcium oxide may react with the flue gas components SO2 or CO2 , causing neck growth between the solid particles. This neck growth between particles may lead to both deposits in the cyclone and plugging of the cyclone return leg. In this study we made use of a sintering testing method, based on compressive strength tests of heat-treated cylindrical pellets. Laboratory-prepared petroleum coke ash was mixed with two potential bed materials, limestone and dolomite, and sintering tests were performed in three different gas atmospheres. Significant differences were found between the mixtures as a function of both the gas atmosphere and temperature. We also performed thermogravimetric analyses on one of the bed materials, the limestone. Based on these results a mechanism for the formation of cyclone deposits and bed material agglomeration in the return leg was suggested.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanisms of Bed Material Agglomeration in a Petroleum Coke-Fired Circulating Fluidized Bed Boiler
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2795038
dc.journal.fristpage215
dc.journal.lastpage218
dc.identifier.eissn1528-8994
dc.keywordsCoke
dc.keywordsBoilers
dc.keywordsFluidized beds
dc.keywordsPetroleum
dc.keywordsMechanisms
dc.keywordsParticulate matter
dc.keywordsFiring (materials)
dc.keywordsSintering
dc.keywordsCompressive strength
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsFlue gases
dc.keywordsTesting AND Mixtures
dc.treeJournal of Energy Resources Technology:;1998:;volume( 120 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record