Show simple item record

dc.contributor.authorL. C. Maley
dc.contributor.authorW. P. Jepson
dc.date.accessioned2017-05-08T23:56:22Z
dc.date.available2017-05-08T23:56:22Z
dc.date.copyrightSeptember, 1998
dc.date.issued1998
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26477#185_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120309
dc.description.abstractThis paper studies the liquid holdup within the mixing zone of the slug. The results of the study show that the liquid holdup begins at the liquid holdup of the liquid film before the slug and then increases until the end of the mixing zone is reached. Once past the mixing zone of the slug, the average liquid holdup becomes constant. As the height of the liquid film and/or viscosity increases, so does the liquid holdup at any given film Froude number. Since the liquid holdup becomes constant once past the mixing zone of the slug, the mixing zone length was determined for the film Froude numbers studied. The results show that the mixing zone length increases linearly with film Froude number and is independent of the viscosity of the liquid in the slug for a viscosity range of 1 to 16.6 cP.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLiquid Holdup in Large-Diameter Horizontal Multiphase Pipelines
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2795033
dc.journal.fristpage185
dc.journal.lastpage191
dc.identifier.eissn1528-8994
dc.keywordsViscosity
dc.keywordsCathodic protection
dc.keywordsPipelines
dc.keywordsLiquid films AND Slug
dc.treeJournal of Energy Resources Technology:;1998:;volume( 120 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record