Show simple item record

dc.contributor.authorE. Budak
dc.contributor.authorY. Altintaş
dc.date.accessioned2017-05-08T23:56:10Z
dc.date.available2017-05-08T23:56:10Z
dc.date.copyrightMarch, 1998
dc.date.issued1998
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26245#22_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120209
dc.description.abstractA new analytical method of chatter stability prediction in milling is presented. A general formulation for the dynamic milling system is developed by modeling the cutter and workpiece as multi-degree-of-freedom structures. The dynamic interaction between the milling cutter and workpiece is modeled considering the varying dynamics in the axial direction. The dynamic milling forces are governed by a system of periodic differential equations with delay whose stability analysis leads to an analytical relation for chatter stability limit in milling. The model can be used to determine the chatter free axial and radial depth of cuts without resorting to time domain simulations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical Prediction of Chatter Stability in Milling—Part I: General Formulation
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801317
dc.journal.fristpage22
dc.journal.lastpage30
dc.identifier.eissn1528-9028
dc.keywordsStability
dc.keywordsChatter
dc.keywordsMilling
dc.keywordsDelays
dc.keywordsDynamics (Mechanics)
dc.keywordsForce
dc.keywordsDifferential equations
dc.keywordsEngineering simulation AND Modeling
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1998:;volume( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record