Show simple item record

dc.contributor.authorD. Liu
dc.contributor.authorJ. W. Sutherland
dc.contributor.authorK. S. Moon
dc.contributor.authorT. J. Sturos
dc.contributor.authorA. R. Kashani
dc.date.accessioned2017-05-08T23:56:08Z
dc.date.available2017-05-08T23:56:08Z
dc.date.copyrightJune, 1998
dc.date.issued1998
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26246#193_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120187
dc.description.abstractAn active vibration control system for a turning process is presented. The system employs a magnetostrictive actuator and a rate feedback control scheme to suppress the vibration caused by random excitation in the turning process. A specially designed tool holder is developed to implement the actuation and the control scheme effectively. A model which accounts for both the dynamic response of the cutting process and the control system is described. The effectiveness of the vibration control system is studied via simulation and a series of experiments. A disturbance force is applied to the system by a shaker and the dynamic response of the system is observed. The experimental data shows that the rate feedback control scheme adds additional damping to the system and reduces the vibration. A complete set of 24 factorial design cutting experiments were also conducted using the tool holder and experimentally obtained surface profiles were compared to surface profiles obtained without the vibration control. It is shown that the system can improve the surface texture generated by the turning process.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSurface Texture Improvement in the Turning Process Via Application of a Magnetostrictively Actuated Tool Holder
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2802409
dc.journal.fristpage193
dc.journal.lastpage199
dc.identifier.eissn1528-9028
dc.keywordsTurning
dc.keywordsSurface texture
dc.keywordsVibration control equipment
dc.keywordsVibration
dc.keywordsCutting
dc.keywordsDynamic response
dc.keywordsFeedback
dc.keywordsRandom excitation
dc.keywordsVibration control
dc.keywordsActuators
dc.keywordsDamping
dc.keywordsDesign
dc.keywordsForce
dc.keywordsControl systems AND Simulation
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1998:;volume( 120 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record