Show simple item record

dc.contributor.authorS. M. Pandit
dc.contributor.authorT. M. Demeny
dc.date.accessioned2017-05-08T23:56:06Z
dc.date.available2017-05-08T23:56:06Z
dc.date.copyrightSeptember, 1998
dc.date.issued1998
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26249#398_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120156
dc.description.abstractThis preliminary study, relating plasma stagnation pressure to the current level, provided an initial step toward the development of feedback control of the plasma deposition process. Data consisting of an input voltage and output stagnation pressure were collected about a nominal operating point. Data Dependent Systems (DDS) methodology was utilized to obtain a high-order adequate model and then to reduce it to a first-order model suitable for feedback control. The power supply inductance was credited as the source of the single root characterizing the system. A minimum mean squared control strategy was employed to develop a control equation for the reduced system model. The simulation of the reduced order controller compared favorably with that of an optimal controller, based on the full model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleReduced Model Control of a Plasma Deposition Process
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2805415
dc.journal.fristpage398
dc.journal.lastpage401
dc.identifier.eissn1528-9028
dc.keywordsPlasmas (Ionized gases)
dc.keywordsFeedback
dc.keywordsPressure
dc.keywordsControl equipment
dc.keywordsSimulation
dc.keywordsElectric potential AND Equations
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1998:;volume( 120 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record