Show simple item record

dc.contributor.authorWei-Ching Sun
dc.contributor.authorSusan C. Mantell
dc.contributor.authorKim A. Stelson
dc.date.accessioned2017-05-08T23:56:06Z
dc.date.available2017-05-08T23:56:06Z
dc.date.copyrightDecember, 1998
dc.date.issued1998
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26251#507_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/120152
dc.description.abstractIn thermoplastic tape-laying with in-situ consolidation, a laminated composite is constructed by the local application of heat and pressure. A moving head, applying heat and pressure, lays down and bonds a new layer to the previously bonded layers (substrate). The temperature at the interface between the top ply and the substrate is critical to achieving interlaminar bonding. Recent research on the in-situ thermoplastic composite tape-laying process has focused on modeling, numerical analysis and experimental analysis, but little research has considered the control of this process. In this work, a method is proposed for modeling and control of in-situ thermoplastic composite tape-laying. The key to the control algorithm is predicting the temperature at the interface between the top ply and the substrate. Based on a process model, a state feedback controller and a state estimator for temperature are designed for closed-loop control using the linear quadratic method. Two different approaches are used to develop the process model for real-time closed-loop control through temperature feedback. In the first approach, a low-order lumped parameter model is constructed from a finite difference scheme. The second approach constructs an empirical model through system identification. The structures of the two models are identical, but the parameters differ. The experimental results have shown that the developed estimator and controller can accurately estimate and control the bonding temperature using temperature feedback indicating that the proposed modeling and control methodology can produce a high quality thermoplastic composite laminate.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling and Control of the In-Situ Thermoplastic Composite Tape-Laying Process
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801493
dc.journal.fristpage507
dc.journal.lastpage515
dc.identifier.eissn1528-9028
dc.keywordsThermoplastic composites
dc.keywordsControl modeling
dc.keywordsTemperature
dc.keywordsPressure
dc.keywordsHeat
dc.keywordsBonding
dc.keywordsControl equipment
dc.keywordsFeedback
dc.keywordsState feedback
dc.keywordsControl algorithms
dc.keywordsLaminates
dc.keywordsComposite materials
dc.keywordsLumped parameter models
dc.keywordsModeling
dc.keywordsNumerical analysis AND Experimental analysis
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1998:;volume( 120 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record