Show simple item record

dc.contributor.authorS. Yoshimura
dc.contributor.authorJ.-S. Lee
dc.contributor.authorG. Yagawa
dc.date.accessioned2017-05-08T23:54:32Z
dc.date.available2017-05-08T23:54:32Z
dc.date.copyrightFebruary, 1997
dc.date.issued1997
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28374#18_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/119292
dc.description.abstractThis paper describes a new automated system for analyzing the stress intensity factors (SIFs) of three-dimensional cracks. A geometry model containing one or several three-dimensional cracks is defined using a commercial CAD system, DESIGNBASE. Several local distributions of node density are chosen from the database of the present system, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-noded quadratic tetrahedral solid elements are generated by the Delaunay method. A user imposes material properties and boundary conditions onto parts of the geometry model such as loops and edges by clicking them with a mouse and by inputting values. For accurate analyses of the stress intensity factors, finer elements are generated in the vicinity of crack tips, thanks to the fuzzy knowledge processing. The singular elements such that the midpoint nodes near crack front are shifted at the quarter-points are automatically placed along the three-dimensional crack front. The complete finite element model generated is given to a commercial finite element code, MARC, and a stress analysis is performed. The stress intensity factors are calculated using the displacement extrapolation method. To demonstrate practical performances of the present system, two dissimilar semi-elliptical surface cracks in a plate subjected to uniform tension are solved, and their interaction effects are discussed in detail. It is shown from the results that ASME Boiler and Pressure Vessel Code, Section XI, Appendix A gives a conservative stress intensity factor for two identical adjacent surface cracks and for two dissimilar adjacent surface cracks.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAutomated System for Analyzing Stress Intensity Factors of Three-Dimensional Cracks: Its Application to Analyses of Two Dissimilar Semi-Elliptical Surface Cracks in Plate
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842261
dc.journal.fristpage18
dc.journal.lastpage26
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsStress
dc.keywordsSurface cracks
dc.keywordsGeometry
dc.keywordsDensity
dc.keywordsStress analysis (Engineering)
dc.keywordsTension
dc.keywordsMaterials properties
dc.keywordsComputer-aided design
dc.keywordsFinite element analysis
dc.keywordsASME Boiler and Pressure Vessel Code
dc.keywordsBoundary-value problems
dc.keywordsDatabases
dc.keywordsDisplacement AND Finite element model
dc.treeJournal of Pressure Vessel Technology:;1997:;volume( 119 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record