Show simple item record

dc.contributor.authorV. Koundy
dc.contributor.authorT. Forgeron
dc.contributor.authorF. Le Naour
dc.date.accessioned2017-05-08T23:54:28Z
dc.date.available2017-05-08T23:54:28Z
dc.date.copyrightAugust, 1997
dc.date.issued1997
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28378#313_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/119252
dc.description.abstractIn order to validate the long-term behavior of fast breeder reactor steam generator tubes, a creep test monitoring program has been undertaken. A series of over one hundred tests was performed on small specimen tubes which were cut from the as-received tube material of Incoloy 800, similar to those used in generator applications. In contrast to uniaxial conditions in which constant load conditions usually apply, multiaxial experiments were performed assuming constant stress conditions. Thin walled tube approximation was used to estimate the stresses across the tube wall thickness required for given internal tube pressures. This paper deals with a refined numerical modeling of stresses and strains in the pressurized test specimens, taking into account: internal pressure changes, nonlinear geometrical effects, and creep deformation during all the test procedure cycles. Comparison of the numerical results with the experimental measurements shows a good agreement which validates the multiaxial generalization of the RCC-MR strain creep laws which were used in the calculations. A multiaxial creep rupture criterion is discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling of Multiaxial Creep Behavior for Incoloy 800 Tubes Under Internal Pressure
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842310
dc.journal.fristpage313
dc.journal.lastpage318
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsCreep
dc.keywordsModeling
dc.keywordsStress
dc.keywordsBoilers
dc.keywordsApproximation
dc.keywordsCycles
dc.keywordsGenerators
dc.keywordsRupture
dc.keywordsWall thickness
dc.keywordsBreeder reactors
dc.keywordsMeasurement AND Computer simulation
dc.treeJournal of Pressure Vessel Technology:;1997:;volume( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record