Show simple item record

dc.contributor.authorT. Nakamura
dc.contributor.authorE. Krempl
dc.date.accessioned2017-05-08T23:54:28Z
dc.date.available2017-05-08T23:54:28Z
dc.date.copyrightAugust, 1997
dc.date.issued1997
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28378#306_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/119251
dc.description.abstractThe ratcheting behavior of the “unsymmetric two-bar system” was investigated by numerical experiments. The two bars are restrained to the same length and are subjected to a constant load. One bar sees cyclic temperature variations, while the other bar is kept at constant temperature. The material models employed are rate independent plasticity (kinematic hardening) and the viscoplasticity theory based on overstress (VBO) matched to represent the cyclic neutral 6061 T6 aluminum alloy elastic and inelastic deformation behavior. For simplicity, temperature-independent material properties were assumed. Numerical analyses were performed to investigate the effects of rate of thermal loading and temperature range. Elastic-inelastic shake down is ultimately achieved due to work hardening. There is a strain range increase until it reaches a steady value. Kinematic hardening and VBO predict almost the same strain range, which, for the case of VBO, is nearly rate-independent. The behavior for both material models is very different for the mean strain. For VBO, the number of cycles to shakedown is rate-dependent and is considerably larger than for kinematic hardening. Finally, the steady-state mean strain and strain range are computed directly for VBO.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analysis of the Two-Bar Ratcheting Behavior Using the Viscoplasticity Theory Based on Overstress (VBO)
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842309
dc.journal.fristpage306
dc.journal.lastpage312
dc.identifier.eissn1528-8978
dc.keywordsViscoplasticity
dc.keywordsTemperature
dc.keywordsHardening
dc.keywordsMaterials properties
dc.keywordsNumerical analysis
dc.keywordsCycles
dc.keywordsSteady state
dc.keywordsWork hardening
dc.keywordsAluminum alloys
dc.keywordsStress
dc.keywordsPlasticity AND Deformation
dc.treeJournal of Pressure Vessel Technology:;1997:;volume( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record