Show simple item record

dc.contributor.authorM. D. Rana
dc.contributor.authorJ. H. Smith
dc.contributor.authorR. O. Tribolet
dc.date.accessioned2017-05-08T23:54:27Z
dc.date.available2017-05-08T23:54:27Z
dc.date.copyrightNovember, 1997
dc.date.issued1997
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28380#475_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/119236
dc.description.abstractHigh-pressure industrial gases (such as oxygen, nitrogen, argon, hydrogen, etc.) are stored and transported in portable cylinders. ISO TC58 SC3 has developed a draft specification 9809 for design and fabrication of high-pressure cylinders with maximum tensile strength limitation of 1100 N/mm2 . In order to extend the ISO 9809 rules for higher than 1100 N/mm2 strength level cylinders, a working group WG14 was formed in 1989 to develop new rules to assure adequate fracture resistance. In 1994, WG14 recommended a simple, but unique flawed cylinder test method for design qualification of the cylinder and acceptance criteria to assure adequate fracture resistance. WG14 also recommended Charpy-V-notch impact tests to control the required fracture resistance on production cylinders. This paper presents the technical basis that was employed in developing the flawed cylinder test method and acceptance criteria. The specification was developed for seamless steel cylinders having actual strength in the range of 1100 to 1400 N/mm2 and cylindrical section wall thickness in the range of 3 to 10 mm. Flawed cylinder tests were conducted on several hundred cylinders of varying sizes and strength levels. The specification requires to demonstrate LEAK-BEFORE-BREAK performance of the cylinder having flaw length equal to 1.6 (o.d. × tdesign )0.5 at failure pressure = (tdesign /tactual ) × Design Pressure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTechnical Basis for Flawed Cylinder Test Specification to Assure Adequate Fracture Resistance of ISO High-Strength Steel Cylinder
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842332
dc.journal.fristpage475
dc.journal.lastpage480
dc.identifier.eissn1528-8978
dc.keywordsElectrical resistance
dc.keywordsHigh strength steel
dc.keywordsCylinder tests (Concrete)
dc.keywordsFracture (Process)
dc.keywordsCylinders
dc.keywordsDesign
dc.keywordsAcceptance criteria
dc.keywordsPressure
dc.keywordsHigh pressure (Physics)
dc.keywordsSteel
dc.keywordsManufacturing
dc.keywordsIndustrial gases
dc.keywordsFailure
dc.keywordsHydrogen
dc.keywordsImpact testing
dc.keywordsNitrogen
dc.keywordsOxygen
dc.keywordsTensile strength
dc.keywordsWall thickness AND Leak-before-break
dc.treeJournal of Pressure Vessel Technology:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record