Show simple item record

dc.contributor.authorC. Lay
dc.contributor.authorJ. Madia
dc.contributor.authorS. K. Sinha
dc.contributor.authorO. A. Abu-Yasein
dc.contributor.authorM. A. Pickett
dc.date.accessioned2017-05-08T23:54:27Z
dc.date.available2017-05-08T23:54:27Z
dc.date.copyrightNovember, 1997
dc.date.issued1997
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28380#451_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/119232
dc.description.abstractThe damping coefficients and ratios of piping system snubber supports were found to vary logarithmically with pipe support nodal displacement. For piping systems with fundamental frequencies in the range of 0.6 to 6.6 Hz, the support damping ratio for snubber supports was found to increase with increasing fundamental frequency. For 3-kip snubbers, damping coefficient and damping ratio decreased logarithmically with nodal displacement, indicating that the 3-kip snubbers studied behaved essentially as coulomb dampers; while for the 10-kip snubbers studied, damping coefficient and damping ratio increased logarithmically with nodal displacement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Influence of Support Hardware and Piping System Seismic Response on Snubber Support Damping
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842329
dc.journal.fristpage451
dc.journal.lastpage456
dc.identifier.eissn1528-8978
dc.keywordsHardware
dc.keywordsDamping
dc.keywordsPiping systems
dc.keywordsDisplacement
dc.keywordsFrequency
dc.keywordsCoulombs
dc.keywordsPipes AND Dampers
dc.treeJournal of Pressure Vessel Technology:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record