Show simple item record

dc.contributor.authorC. Liu
dc.contributor.authorD. D. Macdonald
dc.date.accessioned2017-05-08T23:54:26Z
dc.date.available2017-05-08T23:54:26Z
dc.date.copyrightNovember, 1997
dc.date.issued1997
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28380#393_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/119224
dc.description.abstractLocalized corrosion phenomena, including pitting corrosion, stress corrosion cracking, and corrosion fatigue, are the principal causes of corrosion-induced damage in electric power-generating facilities and typically result in more than 50 percent of the unscheduled outages. In this paper, we describe a deterministic method for predicting localized corrosion damage in low-pressure steam turbine disks downstream of the Wilson line, where a condensed, thin electrolyte layer exists on the steel disk surfaces. Our calculations show that the initiation and propagation of stress corrosion cracking (SCC) is not very sensitive to the oxygen content of the steam, but is sensitive to the conductivity of the condensed liquid layer and the stresses (residual and operational) that the disk experiences in service.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Failures of Low-Pressure Steam Turbine Disks
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2842321
dc.journal.fristpage393
dc.journal.lastpage400
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsDisks
dc.keywordsFailure
dc.keywordsSteam turbines
dc.keywordsCorrosion
dc.keywordsStress corrosion cracking
dc.keywordsStress
dc.keywordsFatigue
dc.keywordsSteel
dc.keywordsOxygen
dc.keywordsSteam
dc.keywordsConductivity AND Electrolytes
dc.treeJournal of Pressure Vessel Technology:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record