Show simple item record

dc.contributor.authorA. R. Khamseh
dc.contributor.authorA. M. Waas
dc.date.accessioned2017-05-08T23:53:40Z
dc.date.available2017-05-08T23:53:40Z
dc.date.copyrightJanuary, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26982#56_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118816
dc.description.abstractWe report the results of an experimental investigation carried out for the analysis of failure mechanisms in fibrous laminated composite plates containing stress raisers, in the form of circular cutouts, under static biaxial planar compressive loading (i.e., compression in the two inplane orthogonal directions). A series of biaxial tests were carried out with 48 ply graphite/epoxy composites of varying fiber orientation. In all cases, the hole diameter to plate width aspect ratio remained in a range suitable for infinite plate assumptions. Fiber microbuckling, fiber kink banding, and fiber/matrix debonding are identified as the dominant failure mechanisms.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFailure Mechanisms of Composite Plates With a Circular Hole Under Remote Biaxial Planar Compressive Loads
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805974
dc.journal.fristpage56
dc.journal.lastpage64
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsStress
dc.keywordsFailure mechanisms
dc.keywordsPlates (structures)
dc.keywordsFibers
dc.keywordsEpoxy adhesives
dc.keywordsCompression
dc.keywordsFailure analysis
dc.keywordsGraphite AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record