Show simple item record

dc.contributor.authorH. Zeng
dc.contributor.authorW. N. Sharpe
dc.date.accessioned2017-05-08T23:53:40Z
dc.date.available2017-05-08T23:53:40Z
dc.date.copyrightJanuary, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26982#46_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118814
dc.description.abstractBiaxial strains were measured at the roots of single notches in zirconium alloy specimens under loading and creep conditions (up to 1200 hours) at 250°C. A laser-based interferometric technique was used; details of the measurement procedures are given in another paper. Here, the Bodner model is incorporated into the ABAQUS finite element code and used to predict the biaxial strains at the notch root during loading and for a creep duration of 100 hours. The strains during loading agree quite well with the measured ones while the predicted creep strains are smaller. This discrepancy is attributed to the lack of precision in determining the constants for the Bodner model from smooth-specimen tests. Both the measurement technique and the Bodner model are well-suited for studies of notch response.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBiaxial Creep Strains at Notch Roots—Measurement and Modeling
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805972
dc.journal.fristpage46
dc.journal.lastpage50
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsModeling
dc.keywordsAccuracy
dc.keywordsZirconium alloys
dc.keywordsLasers
dc.keywordsInterferometry AND Finite element analysis
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record