Show simple item record

dc.contributor.authorHassan Mahfuz
dc.contributor.authorMd. Maniruzzaman
dc.contributor.authorUday Vaidya
dc.contributor.authorTimothy Brown
dc.contributor.authorShaik Jeelani
dc.date.accessioned2017-05-08T23:53:39Z
dc.date.available2017-05-08T23:53:39Z
dc.date.copyrightApril, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26985#186_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118802
dc.description.abstractMonotonic tensile and fatigue response of continuous silicon carbide fiber reinforced silicon nitride (SiCf /Si3 N4 ) composites has been investigated. The monotonic tensile tests have been performed at room and elevated temperatures. Fatigue tests have been conducted at room temperature (RT), at a stress ratio, R = 0.1 and a frequency of 5 Hz. It is observed during the monotonic tests that the composites retain only 30 percent of its room temperature strength at 1600°C suggesting a substantial chemical degradation of the matrix at that temperature. The softening of the matrix at elevated temperature also causes reduction in tensile modulus, and the total reduction in modulus is around 45 percent. Fatigue data have been generated at three load levels and the fatigue strength of the composite has been found to be considerably high; about 75 percent of its ultimate room temperature strength. Extensive statistical analysis has been performed to understand the degree of scatter in the fatigue as well as in the static test data. Weibull shape factors and characteristic values have been determined for each set of tests and their relationship with the response of the composites has been discussed. A statistical fatigue life prediction method developed from the Weibull distribution is also presented. Maximum Likelihood Estimator with censoring techniques and data pooling schemes has been employed to determine the distribution parameters for the statistical analysis. These parameters have been used to generate the S-N diagram with desired level of reliability. Details of the statistical analysis and the discussion of the static and fatigue behavior of the composites are presented in this paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResponse of SiCf/Si3N4 Composites Under Static and Cyclic Loading—An Experimental and Statistical Analysis
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805992
dc.journal.fristpage186
dc.journal.lastpage193
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsSilicon nitride ceramics
dc.keywordsStatistical analysis
dc.keywordsTemperature
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsWeibull distribution
dc.keywordsFibers
dc.keywordsReliability
dc.keywordsElectromagnetic scattering
dc.keywordsFatigue life
dc.keywordsFatigue strength
dc.keywordsFatigue testing
dc.keywordsShapes AND Silicon
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record