Show simple item record

dc.contributor.authorM. N. Aboul Wafa
dc.contributor.authorA. H. Hamdy
dc.contributor.authorA. A. El-Midany
dc.date.accessioned2017-05-08T23:53:39Z
dc.date.available2017-05-08T23:53:39Z
dc.date.copyrightApril, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26985#180_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118801
dc.description.abstractA study of biaxial fatigue of woven roving glass reinforced polyester (GRP) subjected to in-phase and out-of-phase cyclic bending and torsional moments is presented. To evaluate failure theories for this material, tests were conducted on two fiber orientations [0, 90] and [45, −45] tubes. The results showed that for [0, 90] composites the S-N curves in pure bending and in pure torsion are sufficient to predict life. For [45, −45] tubes, the value of the normal stress interaction component of the strength tensor, H12 , has to be obtained. If the ratio of the global flexural stress amplitude, A, to the accompanied global shear stress, B, is less than 2, the value of H12 may be taken as presented by Tsai-Hahn theory. But, if A/B ≥ 2, the value of H12 has to be obtained from [45, −45] pure bending S-N curve, since the failure mode is a combination of interfacial shear and matrix failure. The out-of-phase loading results showed that the life of the specimens at high stress levels is less than that for the in-phase loading with the same peak values A and B.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCombined Bending and Torsional Fatigue of Woven Roving GRP
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805991
dc.journal.fristpage180
dc.journal.lastpage185
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsFailure
dc.keywordsShear (Mechanics)
dc.keywordsTorsion
dc.keywordsTensors
dc.keywordsPolyester fabrics
dc.keywordsComposite materials
dc.keywordsGlass AND Fibers
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record