Show simple item record

dc.contributor.authorYanyao Jiang
dc.contributor.authorPeter Kurath
dc.date.accessioned2017-05-08T23:53:39Z
dc.date.available2017-05-08T23:53:39Z
dc.date.copyrightApril, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26985#161_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118798
dc.description.abstractCurrent research focuses on proportional cyclic hardening and non-Massing behaviors. The interaction of these two hardenings can result in the traditionally observed overall softening, hardening or mixed behavior exhibited for fully reversed strain controlled fatigue tests. Proportional experiments were conducted with five materials, 304 stainless steel, normalized 1070 and 1045 steels, and 7075-T6 and 6061-T6 aluminum alloys. All the materials display similar trends, but the 304 stainless steel shows the most pronounced transient behavior and will be discussed in detail. Existing algorithms for this behavior are evaluated in light of the recent experiments, and refinements to the Armstrong-Frederick class of incremental plasticity models are proposed. Modifications implemented are more extensive than the traditional variation of yield stress, and a traditional strain based memory surface is utilized to track deformation history. Implications of the deformation characteristics with regard to fatigue life estimation, especially variable amplitude loading, will be examined. The high-low step loading is utilized to illustrate the effect of transient deformation on fatigue life estimation procedures, and their relationship to the observed and modeled deformation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of Cyclic Transient Behavior and Implications on Fatigue Life Estimates
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805989
dc.journal.fristpage161
dc.journal.lastpage170
dc.identifier.eissn1528-8889
dc.keywordsFatigue life
dc.keywordsDeformation
dc.keywordsHardening
dc.keywordsStainless steel
dc.keywordsYield stress
dc.keywordsFatigue testing
dc.keywordsHardening (Curing)
dc.keywordsAlgorithms
dc.keywordsSteel
dc.keywordsAluminum alloys AND Plasticity
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record