Show simple item record

dc.contributor.authorMitsuru Kanda
dc.contributor.authorTadashi Hasebe
dc.contributor.authorMasao Sakane
dc.contributor.authorMasateru Ohnami
dc.date.accessioned2017-05-08T23:53:39Z
dc.date.available2017-05-08T23:53:39Z
dc.date.copyrightApril, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26985#153_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118797
dc.description.abstractThis paper describes studies of the tension-torsion multiaxial low cycle fatigue of CMSX-2 Ni-base single crystal superalloy. Tension-torsion low cycle fatigue tests were carried out at 1173K using CMSX-2 hollow cylinder specimens aligned with the {001} axis. Several multiaxial strain and stress parameters were applied to the experimental data to examine the suitability of the parameters to life prediction. All the strain parameters proposed so far gave a large scatter of the data correlation. Discrepant data correlation with the strain parameters resulted from the anisotropic stress response due to the crystallographic texture. Larger Mises equivalent stress was applied in torsion tests than in tension tests at the same Mises strain. However, Mises stress and the equivalent stress based on crack opening displacement gave a satisfactory data correlation. This study developed a new equivalent strain, taking account of the anisotropy of the elastic constants, which correlates the multiaxial low cycle fatigue data with a small scatter.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Temperature Multiaxial Low Cycle Fatigue of CMSX-2 NI-Base Single Crystal Superalloy
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805988
dc.journal.fristpage153
dc.journal.lastpage160
dc.identifier.eissn1528-8889
dc.keywordsCrystals
dc.keywordsSuperalloys
dc.keywordsLow cycle fatigue
dc.keywordsHigh temperature
dc.keywordsStress
dc.keywordsTorsion
dc.keywordsTension
dc.keywordsElectromagnetic scattering
dc.keywordsFracture (Materials)
dc.keywordsTexture (Materials)
dc.keywordsCylinders
dc.keywordsDisplacement
dc.keywordsElastic constants AND Anisotropy
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record