Show simple item record

dc.contributor.authorJ. P. Domblesky
dc.contributor.authorRajiv Shivpuri
dc.date.accessioned2017-05-08T23:53:38Z
dc.date.available2017-05-08T23:53:38Z
dc.date.copyrightApril, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26985#133_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118793
dc.description.abstractThe study presented describes the simulation procedure and methodology used to develop two models for predicting recrystallized grain size in Alloy 718 billet. To simulate multiple pass forging of billet, controlled, high temperature compression testing was used to apply alternate deformation and dwell cycles to Alloy 718 specimens. Grain size obtained by simulation was found to be in excellent agreement with grain size from forged billet when cooling rate was included. The study also revealed that strain per pass and forging temperature were the predominant factors in controlling the recrystallized grain size. Both models were found to accurately predict the recrystallized grain size obtained by compression tests performed at super-solvus temperatures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGrain Size Modeling and Optimization of Rotary Forged Alloy 718
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2805984
dc.journal.fristpage133
dc.journal.lastpage137
dc.identifier.eissn1528-8889
dc.keywordsAlloys
dc.keywordsModeling
dc.keywordsOptimization
dc.keywordsGrain size
dc.keywordsCompression
dc.keywordsForging
dc.keywordsSimulation
dc.keywordsTemperature
dc.keywordsCooling
dc.keywordsCycles
dc.keywordsTesting
dc.keywordsIndium alloys
dc.keywordsHigh temperature AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record