Show simple item record

dc.contributor.authorW. Chen
dc.contributor.authorX. Zhang
dc.date.accessioned2017-05-08T23:53:38Z
dc.date.available2017-05-08T23:53:38Z
dc.date.copyrightJuly, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26986#305_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118787
dc.description.abstractThe mechanical response and failure behavior of Epon 828/T-403 epoxy were experimentally obtained over a strain rate range of 1.7 × 10−5 to 4.7 × 103 s−1 and a temperature range of −190 to 100°C. Compressive loads were applied in both uniaxial and multiaxial manners. A modified split Hopkinson pressure bar was employed to perform dynamic experiments, whereas an Materials Test System (MTS810) was used to conduct experiments under quasi-static loading conditions to establish the trends in strain-rate sensitivity. Multiaxial compression was achieved by installing snug-fit steel sleeves on the lateral surfaces of the cylindrical polymer specimens. The effects of temperature were studied by heating/cooling specimens to desired temperatures before mechanical loads were applied. The experimental results show that the yield strength of the polymer increases with increasing strain rate until adiabatic heating offsets the strain rate hardening. Lateral confinement significantly increases the axial yield strength. Increasing temperature reduces both yield strength and Young’s modulus.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Response of Epon 828/T-403 Under Multiaxial Loading at Various Temperatures
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812261
dc.journal.fristpage305
dc.journal.lastpage308
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsDynamic response
dc.keywordsYield strength
dc.keywordsPolymers
dc.keywordsStress
dc.keywordsHardening
dc.keywordsEpoxy adhesives
dc.keywordsTemperature effects
dc.keywordsAdiabatic processes (Thermodynamics)
dc.keywordsCooling
dc.keywordsSteel
dc.keywordsPressure
dc.keywordsElasticity
dc.keywordsCompression
dc.keywordsFailure AND Heating
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record