Show simple item record

dc.contributor.authorE. M. Arruda
dc.contributor.authorS. Ahzi
dc.contributor.authorY. Li
dc.contributor.authorA. Ganesan
dc.date.accessioned2017-05-08T23:53:37Z
dc.date.available2017-05-08T23:53:37Z
dc.date.copyrightJuly, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26986#216_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118772
dc.description.abstractWe examine the strain rate dependent, large plastic deformation in isotropic semi-crystalline polypropylene at room temperature. Constant strain rate uniaxial compression tests on cylindrical polypropylene specimens show very little true strain softening under quasi-static conditions. At high strain rates very large amounts (38 percent) of apparent strain softening accompanied by temperature rises are recorded. We examine the capability of a recently proposed constitutive model of plastic deformation in semi-crystalline polymers to predict this behavior. We neglect the contribution of the amorphous phase to the plastic deformation response and include the effects of adiabatic heating at high strain rates. Attention is focused on the ability to predict rate dependent yielding, strain softening, strain hardening, and adiabatic temperature rises with this approach. Comparison of simulations and experimental results show good agreement and provide insight into the merits of using a polycrystalline modeling assumption versus incorporating the amorphous contribution. Discrepancies between experiments and model predictions are explained in terms of expectations associated with neglecting the amorphous deformation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRate Dependent Deformation of Semi-Crystalline Polypropylene Near Room Temperature
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812247
dc.journal.fristpage216
dc.journal.lastpage222
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsAdiabatic processes (Thermodynamics)
dc.keywordsConstitutive equations
dc.keywordsEngineering simulation
dc.keywordsModeling
dc.keywordsPolymers
dc.keywordsCompression AND Work hardening
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record