Show simple item record

dc.contributor.authorY. S. Kwon
dc.contributor.authorH. T. Lee
dc.contributor.authorK. T. Kim
dc.date.accessioned2017-05-08T23:53:36Z
dc.date.available2017-05-08T23:53:36Z
dc.date.copyrightOctober, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26988#366_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118758
dc.description.abstractDensification behavior of 316L stainless-steel powder under die pressing was studied. The friction effects between the powder and the die wall under different die pressing modes were also investigated. The elastoplastic constitutive equations, based on the yield functions by Fleck and Gurson and by Shima and Oyane, were implemented into a finite element program to simulate die compaction processes. The friction coefficient between the powder and the die wall was determined from the relationship between the compaction pressure and the ejection pressure. Finite element calculations were compared with experimental data for densification and deformation of 316L stainless-steel powder under single and double action die pressing.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis for Cold Die Compaction of Stainless-Steel Powder
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812271
dc.journal.fristpage366
dc.journal.lastpage373
dc.identifier.eissn1528-8889
dc.keywordsCompacting
dc.keywordsStainless steel
dc.keywordsPressing (Garments)
dc.keywordsFriction
dc.keywordsPressure
dc.keywordsFinite element analysis
dc.keywordsFunctions
dc.keywordsConstitutive equations AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record