Show simple item record

dc.contributor.authorJ. Cao
dc.contributor.authorM. C. Boyce
dc.date.accessioned2017-05-08T23:53:36Z
dc.date.available2017-05-08T23:53:36Z
dc.date.copyrightOctober, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26988#354_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118757
dc.description.abstractIn the sheet metal forming industry, there is increasing demand to lower manufacturing costs while also providing a decrease in product development turnaround period as well as lighter weight products. These demands have put increasing pressure on the development and use of predictive numerical simulations and in the design and optimization of new forming technologies. In this paper, two of the primary in-process failure modes of sheet metal, wrinkling and tearing, are examined followed by construction of an advanced forming technology—Variable Binder Force—using numerical tools. Specifically, a methodology of capturing the onset of wrinkling and postbuckling behavior proposed in Cao and Boyce (1997) is used to predict wrinkling failure in conical and square cup forming. The results obtained from simulations and experiments demonstrate that the proposed method is not only accurate, but also robust. A tearing criterion based on Forming Limit Diagrams of non-proportional loading paths is then developed and again shows excellent predictability. Finally, a Variable Binder Force (VBF) trajectory for conical cup forming is designed using simulations which incorporate feedback control to the binder based on the predictions of wrinkling and tearing of the sheet. Experiments using this predefined VBF trajectory show a 16 percent increase informing height over the best conventional forming method, that is, constant binder force. The uniqueness of this paper is that numerical simulation is no longer utilized only as a verification tool, but as a design tool for, advanced manufacturing process with the help of the predictive tools incorporated directly into the numerical model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Predictive Tool for Delaying Wrinkling and Tearing Failures in Sheet Metal Forming
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812270
dc.journal.fristpage354
dc.journal.lastpage365
dc.identifier.eissn1528-8889
dc.keywordsSheet metal work
dc.keywordsFailure
dc.keywordsBinders (Materials)
dc.keywordsComputer simulation
dc.keywordsForce
dc.keywordsTrajectories (Physics)
dc.keywordsDesign
dc.keywordsEngineering simulation
dc.keywordsEquipment and tools
dc.keywordsManufacturing
dc.keywordsSheet metal
dc.keywordsConstruction
dc.keywordsFeedback
dc.keywordsProduct development
dc.keywordsWeight (Mass)
dc.keywordsOptimization
dc.keywordsPressure AND Cigarette lighters
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record