Show simple item record

dc.contributor.authorY. Estrin
dc.contributor.authorA. Molinari
dc.contributor.authorS. Mercier
dc.date.accessioned2017-05-08T23:53:35Z
dc.date.available2017-05-08T23:53:35Z
dc.date.copyrightOctober, 1997
dc.date.issued1997
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26988#322_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118752
dc.description.abstractA dislocation density related constitutive model that accounts for the strain-rate sensitivity of the flow stress and, notable, of the strain-hardening coefficient was applied to describe adiabatic shear banding in face centered cubic metals. The parameter values of a prototype material, for which numerical simulations were carried out, are close to those of copper. The effect of the material parameters, especially of those reflecting the two rate sensitivities, on the occurrence of strain localization in a thin-walled tube under torsion containing a geometrical defect was investigated systematically. The results obtained provide some guidance with respect to design of materials with high resistance to strain localization and high mechanical energy absorption. Another outcome of this study is the recognition that for the problem in question linear stability analysis cannot provide a reliable criterion even for the onset of strain localization, and that numerical simulations have to be invoked.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Role of Rate Effects and of Thermomechanical Coupling in Shear Localization
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2812265
dc.journal.fristpage322
dc.journal.lastpage331
dc.identifier.eissn1528-8889
dc.keywordsShear (Mechanics)
dc.keywordsComputer simulation
dc.keywordsAbsorption
dc.keywordsElectrical resistance
dc.keywordsStress
dc.keywordsStability
dc.keywordsFlow (Dynamics)
dc.keywordsMetals
dc.keywordsCopper
dc.keywordsTorsion
dc.keywordsEngineering prototypes
dc.keywordsConstitutive equations
dc.keywordsDesign
dc.keywordsPerformance
dc.keywordsDislocation density AND Work hardening
dc.treeJournal of Engineering Materials and Technology:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record