Show simple item record

dc.contributor.authorM. Kanj
dc.contributor.authorJ.-C. Roegiers
dc.contributor.authorM. Zaman
dc.date.accessioned2017-05-08T23:53:14Z
dc.date.available2017-05-08T23:53:14Z
dc.date.copyrightDecember, 1997
dc.date.issued1997
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26474#223_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118561
dc.description.abstractThe sand production problem is plaguing the petroleum industry by its adverse effects on thousands of oil and gas fields throughout the world. A tremendous amount of money is spent each year on attempts to predict and control sand influx and/or repair wells and equipment damaged by sand. Sand inflow into the well during production leads to casing abrasion and failure, formation damage and distortion, and frequent sand removal and cleaning. The sand control process has a major influence on the type of the well completion design and it influences the guidelines for the completion process. In addition, many wells are currently being produced below their potential in order to restrict sand influx or erosion, and/or as a result of poorly designed or installed sand control methods. Evidently, the sand prediction and control problem is exceedingly complex and suggests the use of heuristics and the appropriateness of the expert systems technology. An automated sand control consultant and expert system has been developed. The system is aimed at assisting users in predicting sand occurrence during production and in selecting and designing the proper sand-exclusion treatments. The knowledge base of the system is based on an easy upgrade, easy expand format and involves four primary modules, thus giving the end-user greater flexibility to tentatively access and evaluate different scenarios of knowledge processing. Input data can range from “not known” formation characteristics and/or well stimulation requirements, for which the system gives conservative recommendations based on the remaining known facts, completion characteristics of the hole, well history, and geological probability; to cases with detailed information available, in which case very elaborate and precise recommendations are prescribed. This paper describes the knowledge involved in various modules of the sanding system, as well as future plans and further developments.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSanding: An Expert-System Approach for Assessment and Control in Wells
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2794994
dc.journal.fristpage223
dc.journal.lastpage235
dc.identifier.eissn1528-8994
dc.keywordsWells
dc.keywordsExpert systems
dc.keywordsSands
dc.keywordsDesign
dc.keywordsErosion
dc.keywordsPlasticity
dc.keywordsMaintenance
dc.keywordsNatural gas fields
dc.keywordsAbrasion
dc.keywordsPetroleum industry
dc.keywordsFailure
dc.keywordsProbability AND Inflow
dc.treeJournal of Energy Resources Technology:;1997:;volume( 119 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record