Show simple item record

dc.contributor.authorP. Ruther
dc.contributor.authorW. Menz
dc.contributor.authorW. Bacher
dc.contributor.authorK. Feit
dc.contributor.authorD. Maas
dc.date.accessioned2017-05-08T23:53:07Z
dc.date.available2017-05-08T23:53:07Z
dc.date.copyrightMarch, 1997
dc.date.issued1997
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26231#57_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118498
dc.description.abstractA microtesting system manufactured by the LIGA process (Becker et al, 1986) combined with a new sacrificial structure technique is presented. The system is used for bending experiments to determine the Young’s modulus of electroplated materials used in the LIGA process. The force needed to bend the specimen is generated by a pneumatically driven microactuator. This actuator is able to produce forces in the range of several 10 mN and displacements of 50 μm and more. Bending of the specimen is detected optically. With a trap for adhesive, adhesive bonding can be applied to cover the actuator chamber with a glass platelet. For the fluidic supply of the actuator, hoses are bonded into microtunnels (140 μm diameter) running parallel to the substrate and passing through the sidewalls of the actuator housing. The microtunnels are produced by the sacrificial structure technique.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrototype of a Microtesting System Made by the LIGA Process to Measure the Young’s Modulus in Cantilever Microbeams
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801214
dc.journal.fristpage57
dc.journal.lastpage60
dc.identifier.eissn1528-9028
dc.keywordsElasticity
dc.keywordsEngineering prototypes
dc.keywordsCantilevers
dc.keywordsMicrobeams
dc.keywordsActuators
dc.keywordsAdhesives
dc.keywordsForce
dc.keywordsPlatelets
dc.keywordsBonding
dc.keywordsManganese (Metal)
dc.keywordsGlass AND Microactuators
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1997:;volume( 119 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record