Show simple item record

dc.contributor.authorLiming Chen
dc.contributor.authorNabil G. Chalhoub
dc.date.accessioned2017-05-08T23:52:57Z
dc.date.available2017-05-08T23:52:57Z
dc.date.copyrightSeptember, 1997
dc.date.issued1997
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26238#421_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118405
dc.description.abstractThe present work addresses modeling and control issues pertaining to the positioning and orientating of rigid body payloads as they are being manipulated by flexible spherical robotic manipulators. A general approach, to systematically derive the equations of motion of the robotic manipulator, is used herein. The objective of the controller is to yield a desired rigid body response of the arm while damping out the transverse and torsional vibrations of the compliant link. Note that the control objective has to be achieved by solely relying on the existing joint actuators whose band-widths are far below the natural frequencies of the torsional modes. The current work demonstrates that, in spite of the physical limitations of the system, the controller can actively damp out the torsional vibrations by relying on the coupling terms between the torsional vibrations and the remaining degrees of freedom of the arm. Moreover, a gain scheduling procedure is introduced to continuously tune the controller to the natural frequencies of the flexible link whose length is varied by the prismatic joint. The digital simulation results demonstrate the capability of the “rigid and flexible motion controller (RFMC)” in drastically attenuating the transverse and torsional vibrations during point-to-point (PTP) maneuvers of the arm. Furthermore, the gain scheduling procedure is shown to significantly reduce the degradations in the RFMC performance that are brought about by having the flexible link connected to a prismatic joint. A limited experimental work has also been conducted to demonstrate the viability of the proposed approach.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling and Control of Transverse and Torsional Vibrations in a Spherical Robotic Manipulator: Theoretical and Experimental Results
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801274
dc.journal.fristpage421
dc.journal.lastpage430
dc.identifier.eissn1528-9028
dc.keywordsVibration
dc.keywordsManipulators
dc.keywordsControl modeling
dc.keywordsControl equipment
dc.keywordsGain scheduling
dc.keywordsFrequency
dc.keywordsDegrees of freedom
dc.keywordsActuators
dc.keywordsDamping
dc.keywordsMotion
dc.keywordsComputer simulation AND Equations of motion
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1997:;volume( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record