Show simple item record

dc.contributor.authorWoosoon Yim
dc.contributor.authorSahjendra N. Singh
dc.date.accessioned2017-05-08T23:52:57Z
dc.date.available2017-05-08T23:52:57Z
dc.date.copyrightSeptember, 1997
dc.date.issued1997
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26238#412_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/118404
dc.description.abstractThis paper presents a new approach to end-point trajectory control of flexible macro-micro manipulator based on nonlinear inversion and predictive control techniques. In this approach, precise control of the end-effector trajectory is accomplished by the inverse controller of the rigid micro manipulator, and the predictive controller steers the end point of the flexible macro manipulator with limited elastic oscillation. The predictive control law is obtained by minimizing a quadratic function of the tip tracking error, the elastic deflection, and the input torque of the flexible macro manipulator. The feedback parameters of the predictive controller are chosen such that zero dynamics are asymptotically stable. The combination of the inverse and the predictive controllers accomplishes precise end-effector trajectory tracking and elastic mode stabilization. These results are applied to a planar macro-micro manipulator system consisting of one flexible link and two micro rigid links. Simulation results are presented to show that in the closed-loop system time varying end point trajectory control and elastic mode stabilization are accomplished.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNonlinear Inverse and Predictive End Point Trajectory Control of Flexible Macro-Micro Manipulators
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2801273
dc.journal.fristpage412
dc.journal.lastpage420
dc.identifier.eissn1528-9028
dc.keywordsTrajectories (Physics)
dc.keywordsManipulators
dc.keywordsControl equipment
dc.keywordsPredictive control
dc.keywordsEnd effectors
dc.keywordsErrors
dc.keywordsFeedback
dc.keywordsSimulation results
dc.keywordsClosed loop systems
dc.keywordsDeflection
dc.keywordsOscillations
dc.keywordsDynamics (Mechanics) AND Torque
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1997:;volume( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record